-"Reset" button does not reset negative support angles
-Going between tabular and graphical, inputted data is cleared
-In the tabular view, arrow keys need to be able to go from field to field
-On page refresh, values are retained, but sag/conductor angle disabling is not

Quotes from "Steven" (Email from rajakohli@hotmail.com, subj: "FW: Fw: Live Line Calculation Tool")
	-I think a 25% safety margin should be added to the tension figures as well. Originally the program was designed only for vertical and horizontal force but i believe users are also taking note of the tension values. As such a "+ 25%" should be included in the table rows for tension. (therefore a calculation will need to be inserted that multiples the current result by 1.25)
	-In regards to the table we may have to put some smarts into the programming or a text message to highlight that the final conditions results are only relevant if performing:
        Conductor movement
        Height Change
        Using a tag line


----------More Information Needed----------
-In tabular view: the tab button does not go from field to field (please make it go top to bottom, before going left to right)
-In graphical view, doesn't tab from conductor angle to the next field (Span 2)