Tower has a problem whereby it is cutting out, Graham Reibelt has a had a look and asked for a test procedure to be carried out. Procedure is 1.load basket to capacity  2.set up tower including getting wheels off ground  3.lift tower and extend to get basket furthest away from truck then turn 90 deg so basket is to side of truck  4. now check 2x micro switches on fron boom rest to see if they are both activated, if not drill and tap with grub screw to alow adjust and then adjust as needed.   Problem was legs coming off ground and tower cuting out , then to resett you just had to lift basket strap but this means boom rest switch is engaged.  Please relocate angle gauge on front boom rest to LHS leg next to other gauge.  For more info on this pleasetalk to Clint as he was with Graham while tests were being done. we have this friday aswell, they will pick up sat